Daily Archives: November 20, 2018

Clone Printed Circuit Board Conductor Lost Effect

Generally, engineer must consider Clone Printed Circuit Board Conductor Lost Effect, since the substrate pattern cross-sectional area is 100 μm, the DC resistance is about 172 Ω/m, and the MCM pattern cross-sectional area using the miniaturized wire is about 30 μm, but the DC impedance is as high as 573 Ω/m, assuming that the impedance…

Cloning High Speed Transmission PCB Board

Mosfet component can shortens the circuitry delay on the board, which is the basic condition for cloning a high-speed transmission PCB board, and the shorter the length of the line, the better. Reducing the wire delay time usually adopts two methods: wire material length. The delay time per unit length is proportional to the square…